JET 710116K Manuale di Manutenzione e Cura

Operating Instructions and Parts Manual 14-inch Deluxe Pro Band Saw Models: JWBS-14DXPRO (Shown with optional Rip Fence) WALTER MEIER (Manufacturi

10 Thread nut on to table stop bolt (Fig. 2) and attach to trunnion support bracket as shown. Once table is mounted to the trunnion bracket (see sect

11Grounding Instructions This Band Saw must be grounded while in use to protect the operator from electric shock. In the event of a malfunction or

12The 115V attachment plug supplied with the band saw must be replaced with a UL/CSA listed plug suitable for 230V operation, as shown in Figure 23.

Adjustments Tilting the Table Unplug the machine from the power source before making any repair or adjustment! Failure to comply may cause serious

14Changing Blades Blade teeth are sharp! Use care when handling the saw blade. Failure to comply may cause serious injury! 1. Disconnect machin

15Adjusting Blade Tension 1. Disconnect machine from power source. 2. Make sure the blade is tensioned with the release lever in the down position

16Adjusting Blade Tracking Disconnect machine from the power source! Never adjust blade tracking with the machine running! Failure to comply may c

17Adjusting Upper Blade Guides and Thrust Bearings Blade guard has been removed for picture clarity. Never operate the bandsaw without all guards

18Adjusting Lower Blade Guides and Thrust Bearings Table Removed For Clarity. Never operate the bandsaw without a table secured in place. 1. Disc

19Changing Blade Speeds Lower door removed for clarity. Never operate bandsaw without door installed and closed. 1. Disconnect machine from the

2Warranty and Service JET, Wilton and Powermatic warrants every product they sell against manufacturers’ defects. If one of our tools needs service

20Optional Accessories for JWBS-14DXPRO Band Saw 708718R JRF-14 Rip Fence Assembly Includes guide bars, rip fence assembly, fasteners, and mounti

21Troubleshooting (JWBS-14DXPRO Band Saw) PROBLEM POSSIBLE CAUSE SOLUTION Saw stops or will not start 1. Saw unplugged 1. Check plug connect

22Body Assembly (JWBS-14DXPRO)

23Body Assembly (JWBS-14DXPRO) Index Part No. No. Description Size Qty. 1 ... JWBS14DP-1 ... Upper Arm Frame ...

24Index Part No. No. Description Size Qty. 6-19 ... JWBS14DP-6-19 ... Spacer ...

25Index Part No. No. Description Size Qty. 49-18 ... TS-1550071 ... Flat Washer ...

26Index Part No. No. Description Size Qty. 105 ... WI080000 ... Star Washer ...

27Closed Stand Assembly (JWBS-14DXPRO)

28Closed Stand Assembly (JWBS14-DXPRO) Index Part No. No. Description Size Qty. 1 ... JWBS14DP-201 ... Stand ...

29 Electrical Schematic – 115V

3Table of Contents Warranty and Service ...

30Electrical Schematic – 230V

31

32 WALTER MEIER (Manufacturing) Inc. 427 New Sanford Road LaVergne, Tennessee 37086 Phone: 800-274-6848 www.jettools

4 1. Read and understand the entire owner’s manual before attempting assembly or operation. 2. Read and understand the warnings posted on the machi

5 20. Keep visitors a safe distance from the work area. Keep children away. 21. Make your workshop child proof with padlocks, master switches or by r

6Specifications Stock Number ...

7Shipping Contents Open both shipping containers and check for shipping damage. Report any damage immediately to your distributor and shipping agent

8Fasteners for JWBS-14DXPRO 1 – M6x16 carriage bolt (4) 2 – M6x8 pan head screw (1) 3 – M6 hex nut (4) 4 – M8 lock washer (6) 5 – M8 f

9Assembly Read and understand all assembly instructions before attempting assembly! Failure to comply may cause serious injury! Unpacking and Clean